B&K 2250 Light Manual de usuario descargar pdf (Pagina 24)

Hand-held Analyzer Types 2250 and 2270 – User Manual

Reset Button

See item 8 in Fig.2.2 (hardware versions 1 – 3) or Fig.2.3 (hardware version 4).

Located above the USB connector, it is used to reset the analyzer if you have problems with the

analyzer and cannot get it to operate. To reset, press the button with the point of the stylus – see

chapter 9 for troubleshooting.

Slot for Compact Flash (CF) Cards (Hardware version 1 – 3 only)

See item 9 in Fig.2.2.

This slot accepts CF sized cards and can be used for memory or, for example, a modem.

Slot for Secure Digital (SD) Cards

See item 10 in Fig.2.2 (hardware versions 1 – 3) or item 9 and 10 in Fig.2.3 (hardware

version 4).

The SD slots accept SD and SDHC (Secure Digital High Capacity) memory cards, and are

typically used to save measurement data. Capacities upto 32 gigabytes are acceptable.

Note: Hardware versions 1 – 3 have only one SD Card slot.

LAN Socket

See item 12 in Fig.2.2 (hardware versions 1 – 3) or Fig.2.3 (hardware version 4).

All G4 hardware has one LAN socket with 100 Mbit connection. With hardware versions

1 – 3, only Type 2270 is equipped with a 10 Mbit LAN connection.

The LAN Socket provides high-speed direct communication with a Local Area Network. It is

used to synchronise measurement and setup data with a host PC. The yellow LED on the right

is on when there is a link. The green LED on the left blinks when there is activity on the LAN

connection.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 331 332

Sin comentarios

B&K 2250 Light Manual de usuario Pagina 24