B&K 50 Series II Manual de usuario descargar pdf (Pagina 89)

3. Press to start the test. When the test is running, Run will be indicated in place of

Stop. When the test ends, either Pass or Fault will appear next to Stop.

4. To stop the test at any time, press .

3.10 Key Lock

The front panel keys can be locked to prevent unwanted changes to output settings and

instrument configurations. Follow the steps below to enable/disable key lock.

1. Press and then . A * indicator will light up on the display, indicating that the

front panel keys are lock. At this point, all keys are disabled except for the Lock function.

2. To unlock the keys again, press and then again. The * indicator will

disappear and all keys will be enabled.

10.000V

0.000A

0.00W 0. 00W Stop

OFF CC

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 101 102

Sin comentarios

B&K 50 Series II Manual de usuario Pagina 89