B&K 50 Series II Manual de usuario descargar pdf (Pagina 88)

6. Follow the same steps for Step Power and End Power. Press

after each settings to continue.

7. Enter a value for OPP Voltage and press to continue.

8. Enter a value for Max Trip Power, and then Min Trip Power. Press

after each settings to continue.

9. The load will prompt to Save OPP File. Select a number between 1 and

5. Then press to save all settings to the selected location.

Note: At any time when configuring any parameters for the test, you can press the

( ) key to select the previous parameter to edit.

To recall the settings:

1. Press and to enter the OPP Test menu. Select Recall

and press .

2. Use the keypad or knob to select the saved location number and

press . All settings will be recalled when selecting Edit

from the OPP Test menu.

To run the OPP test:

1. Recall the settings from memory by following the steps above.

2. From the OPP Test menu, select Run and press . The display will show the

following:

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 101 102

Sin comentarios

B&K 50 Series II Manual de usuario Pagina 88